//SAM BL.AM/ER
personal projects / research / technical archive
/projects/ePaper News Feed/WRITEUP.md

This project was immensely satisfying once I got to see it working. This is the spiritual successor of my Cyber News Display, but with many improvements:

  • Cordless
  • Less electricity (2+ months runtime on a single charge)
  • Better UI
  • No indoor light polution since it's ePaper

I knew nothing about C++ or Arduino before this, so this was a great learning opportunity.

Overview

This gets BleepingComputer news articles and CISA KEV's (Known Exploited Vulnerabilities) and prints them out in 2 columns on an arduino epaper display. Updates hourly, turns off between updates to save battery and have a clean reset.

This will likely only work on the seeed studio 7.5" epaper display due to driver specifications laid out in driver.h. Besides the driver specific code, it should (hypothetically) work on any TFT_eSPI board.

This article should be consulted before trying to set up this specific board. If you'd rather not, these steps are needed:
* Install Arduino IDE
* Download Seeed GFX library zip

Setup:

1. In Arduino IDE, add the following URL to File > Preferences > Additional Board Manager URLs: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
2. Add Seeed GFX library in Sketch > Include Library > Add ZIP library
3. In Tools: set Port to your COM port for the connected board, and set Board to "XIAO_ESP32C3"
4. Finally, update your local wifi settings in the ePaperNewsFeed.ino file under the setup(), after uploading you should be good to go.

--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Example

Here is how it looks on the seeed Studio's 7.5" ePaper display. No cords needed besides very rarely charging the battery.

ePaper Feed